ARTITEQ Click Rail PRO Corner Connector Corner Connector is a small element used to join two rails together at a corner, whether it’s an inside corner (where two walls meet) or an outside corner (like a chimney breast or pillar). What’s included ARTITEQ Click Rail PRO Corner Connector (Qty 1) wire not included A) Align Your Rails Install your Click Rail PRO on both walls as usual, stopping just before they meet in the corner. You should leave a tiny gap (about 5mm) to account for the thickness of the connector. B) Insert the Connector The connector has two “arms.” Simply slide one arm into the hollow end of your first rail and the other arm into the end of the second rail. C) Snap into Place As you push the rails toward the corner, the connector will bridge the gap. Because the Click Rail PRO is a “click” system, ensure the rails are securely snapped onto their mounting clips near the corner to keep the joint tight and seamless. Why use it? It covers the cut edges of the aluminum rails, making the corner look professional and finished. Connectors allows you to slide your hanging wires around the corner more easily (depending on the wire type used) without them getting caught on sharp metal edges. Most of these connectors are designed to be “universal,” meaning you can flip them to work for both inner and outer corners. Tip If you have to cut your rails to size, try to use a fine-toothed hacksaw and sand the edges smooth before using the connector for the best fit.
